Cascade boiler installation with the Schiedel Metaloterm® MF system.

The Metaloterm® MF system is a modular twin wall insulated flue/chimney system, made of stainless steel, with a sealing ring. Metaloterm® MF is a universal flue/chimney system which is suitable for both high and low temperatures, non-condensing and condensing applications with flue gasses in positive and negative pressure. It can resist a chimney fire.

Therefore the system is suited for a wide range of applications such as boilers, stoves and ovens. The product range also contains a wide variety of silencers. For Passive houses the Metaloterm assortment provides the Iso-block which can be combined with MF. The system can also be used for CHP applications, in this case a special VITON® sealing ring might be necessary. Due to the proven quality Metaloterm® MF has a 10 year guarantee.

APPLICATIONS

ADVANTAGES

  • Atmospheric gas-fired boilers
  • Condensing boilers
  • Wood-fired stoves
  • Industrial ovens, large-scale establishments
  • Universal chimney/flue system
  • Inner- and outer wall from high quality stainless steel
  • No terminal bridges, uninterrupted insulation from base plate to top stub
  • Stress free thermal expansion
  • Fast-build system without the need of sealants
  • Compatible with system Metaloterm® ME, UE and EN
  • High density and high quality insulation
  • High-temperature silicone sealing ring
  • Lightweight elements
  • Immediately ready for use
  • Chimney fire resistant
Details Information
Application Chimney/Flue system
Operating mode Dry/wet
Pressure Negative/positive pressure
Max. working pressure 5000 Pa
Operating temperature 600 °C negative pressure, 200 °C positive pressure
Max. temperature allowed 600 °C negative pressure, 200 °C positive pressure
Inner wall material AISI 316L/EN 1.4404
Inner wall thickness Ø100 – Ø250: 0,4 Ø300 – Ø400: 0,5 Ø450 – Ø700: 0,6 Ø800 – Ø1000: 0,8
Details Information
Outer wall material AISI 304/EN 1.4301
Outer wall thickness Ø100 – Ø400: 0,5 Ø450 – Ø700: 0,6 Ø800 – Ø1000: 0,8
Insulation type Mineral wool
Insulation thickness Ø100 – 400: 25 mm, Ø450 – Ø600: 37,5 mm, Ø700 – Ø1000: 50 mm
Fuel type Gas
Sealant Elastomer
Fuel type Oil/wood/coal/pellets normal(wood)/gas
Sealant Elastomer (in case flue gas temperatures exceed 200°C, sealants as well as the cap and sopor seals have to be removed before installation)
Inner diamter (mm) 100 130 150 180 200 250 300 350 400 450 500 600 700* 800* 900* 1000*
Outer diameter (mm) 150 180 200 230 250 300 350 400 450 525 575 675 800 900 1000 1100
Cross Section (cm2) 79 133 177 254 314 491 706 962 1256 1590 1963 2826 3848 5027 6362 7854
Weight ±kg/m 6 7 8 9 10 12 16 19 21 26 28 34 44 58 65 72

*Only on request

Bunhill 2 Energy Centre

BBC Maida Vale

Black Lake

bunhill
bbc-maida
greggs-37

Airtherm design, supply and install a wide range of efficient, high performance systems including flues & chimneys, natural ventilation & lighting, kitchen ventilation, air conditioning (comfort cooling), heat recovery & heat pumps and solar photovoltaic (PV) panels for commercial, industrial and private sectors. They use products of the highest quality, such as the Schiedel Metaloterm range and can boast experienced engineers with excellence in their field.

Falcon Flues are expert Schiedel chimney system installers. An MF flue system was specified to serve 2 No 1200 KW Hartley & Sugden forced draught boilers at the BBC Studios in Maida Vale due to the the existing flue liner within a freestanding concrete stack collapsing. 2 No 400mm ID stainless steel twin wall insulated flue systems were installed from the boilers through to outside the boiler room and then up the outside of the concrete stack for 15 metres.

Another project from Airtherm Flue Systems Limited, using the Metaloterm MF System in a recent project for Greggs. The Metaloterm® MF system is a modular twin wall insulated flue/chimney system, made of stainless steel, with a sealing ring. Metaloterm® MF is a universal flue/chimney system which is suitable for both high and low temperatures, non-condensing and condensing applications with flue gasses in positive and negative pressure.

Brochure

940003694 Schiedel MF Brochure

940003694 Schiedel MF Brochure

7.28 MB

Component information

The range of components can be found on our Product Information Finder.

For more details you can contact us by using the form below.

 

Personal Data
Contact and inquiry
Browse...

Maximum 10MB

Please note our data protection regulations, which are the basis for any use of data by Schiedel GmbH & Co KG.
Please wait...