The New Retrofit Wall Support

60mm to 200mm version and 200mm to 375mm version available

We’re delighted to introduce the new Retrofit Wall Support, which is exceptionally easy to install, comes with a Lifetime Guarantee, but also saves up to £120 on a typical Ø150 4.5 m bungalow installation using standard black painted components.

So, along with these amazing features and benefits, you are also rewarded Double Love2Shop Reward Points on any ICID or ICS installation using this component.

This component has been introduced to the range to allow for a simple, retrofit support, which has been designed to minimise the footprint of the side plates, whilst maximising the load bearing capability, allowing for one support to be used on most standard bungalow or 2 storey homes, supporting up to 10m of chimney.

Adjustable from between 60mm to 200mm from the wall, it allows for use with either 90 degree or 135 degree tees and can be retrofitted over the top of the standard pipe section immediately above the tee allowing for fast and simple installation.

The 200mm to 375mm version is ideal for using immediately above an offset, supporting the weight as the chimney goes around the eaves/guttering.

And Double Points!

Double points when you register this Retrofit Wall Support with a Schiedel installation using our online guarantee registration portal.
Click here for more details on how to be rewarded for installing with Schiedel.

INSTALLER FRIENDLY FEATURES

Features Benefits
Supports 10m of Double Wall Chimney. One support is enough for standard bungalow and 2 storey house installations.
Adjustment on side plates 60-200mm from wall. Allows 1 component for use with standard 90 degree and 135 degree tees.
Adjustment on side plates 200-375mm from wall. Can be used to support the chimney above an offset where the chimney  is going  past the eaves/guttering
Clamp Band design. Clamp Band can be positioned anywhere on the pipe to tie in with trim collars. It also allows retrofit of support, once pipe is in position.
Captive nuts on clamp band. Simple to install. No nuts to be dropped and lost on site.

60mm – 200mm Adjustment

Int Ø (mm) 100 125 150
Ext Ø (mm) 150 180 200
Weight 1.9 2.0 2.1
SAP Code Black 169696 169697 169698
EAN Black 4049723639476 4049723639483 4049723639490
RRP Black £64.52 £66.40 £67.28
SAP Code Plain 169699 169700 169701
EAN Plain 4049723639506 4049723639513 4049723639520
RRP Plain £64.52 £66.40 £67.28

200mm to 375mm Adjustment

Int Ø (mm) 100 125 150
Ext Ø (mm) 150 180 200
Weight 1.9 2.0 2.1
SAP Code Black 170318 170319 170320
RRP Black £79.99 £80.95 £82.43
SAP Code Plain 170321 170322 170323
RRP Plain £79.99 £80.95 £82.43

Icon

Retrofit Wall Support leaflet 213.94 KB 21 downloads

...

You can also find more information on our Product Information Finder.