US

The Metaloterm® US system is a modular concentric balanced flue system, made of stainless steel which combines air inlet and flue. Metaloterm® US is suitable for high temperature, non-condensing applications with flue gasses in negative pressure. It can be applied on all types of balanced flue gas-fired stoves (class C11 and C31).

US

A modular concentric balanced flue system

The Metaloterm® US system is a modular concentric balanced flue system, made of stainless steel which combines air inlet and flue. Metaloterm® US is suitable for high temperature, non-condensing applications with flue gasses in negative pressure. It can be applied on all types of balanced flue gas-fired stoves (class C11 and C31).

This animation shows how easy it is to install with an inset stove and a horizontal terminal.

Advantages

  • Appliance adaptors are being manufactured on specification
  • Both wall- and roof terminals available
  • Easy assembly; lightweight elements
  • Wide product range offers solutions for virtually all situations
  • Tested in combination with many appliances according to EN 613
  • Also available in black

Technical data

Features
Type Concentric exhaust pipe
Mode of operation Dry
Pressure Negative pressure
Operating pressure 0 Pa
Operating temperature 600 ° C
Short-term temperature 600 ° C
Fuel Gas
Inner shell
Material AISI 304 / EN 1.4301
Wall thickness 0.4 mm
Outer shell
Material AISI 304 / EN 1.4301
Wall thickness 0.4 mm

Colour

Name Lacquer Type Code
Black Matt Heat resistant stove paint (up to 1000 ° C) Schiedel code 910
Anthracite Matt Heat resistant stove paint (up to 1000 ° C) Schiedel code 930
Gray Matt Heat resistant stove paint (up to 1000 ° C) Schiedel code 970
Black grey Semi-glossy Powder coating not heat resistant Ral 7021
Olive black Matt Soft touch Powder coating not heat resistant Cewetherm 300

Other colours on request:

  • RAL Code
  • Powder coating | Wet paint
  • Shiny | Semi-gloss | Matt

Typical installation

US

Offset calculator

With this calculation tool, you can calculate the required distances in two ways:

  1. When the desired horizontal distortion is known and you want to know which degree position is right for the intended situation.
  2. If you want to know what kind of horizontal and vertical warpage occurs when using a specific bend and intermediate length.

The relevant regulations (e.g. DIN 18160 Part 1) must be observed. If necessary, provide a cleaning or inspection opening. Subject to technical changes – dimensions in mm.

CALCULATE WITH DESIRED OFFSET SPAN

Bend angle:
Diameter: mm
Desired offset span:
mm
Size: mm
Size M: mm
Length between bends: mm
Offset height: mm
CALCULATE WITH LENGTH BETWEEN BENDS

Bend angle:
Diameter: mm
Length between bends
mm
Size K: mm
Size M: mm
Offset span: mm
Offset height: mm

Downloads

940003680 Schiedel US Brochure

940003680 Schiedel US Brochure

4.69 MB

Metaloterm US declarations and technical documents

2.73 MB

Contact us

Do you have any questions about our US stainless steel chimney system? Contact us.

Personal Data
Contact and inquiry
Browse...

Maximum 10MB

Please note our data protection regulations, which are the basis for any use of data by Schiedel GmbH & Co KG.
Please wait...

The product range

Under the Metaloterm brand, we offer our customers single-walled, double-walled and concentric exhaust systems. Our single-walled, soot-fire-resistant and high-quality stainless steel systems are ideal for renovations and new buildings.

All products can be quickly assembled using a sleeve system and can be ordered in black, grey or anthracite. Our double-walled systems are also soot fire resistant and reusable. Thanks to an inner and outer jacket made of stainless steel and high-quality thermal insulation, there are no corrosion-causing cold bridges or thermal bridges. Our concentric systems have been tested with many device types in accordance with EN 613. You will also receive boiler connection pieces for each heat generator in black. Here, too, assembly is quick and uncomplicated thanks to our lightweight components.

AD

A modular pre-insulated exhaust system with a sealing sleeve

US

Double-walled system

ME

A modular, single-walled exhaust / exhaust air system with a special internal lip seal

US

Single wall system

MF

A modular, pre-insulated exhaust gas / exhaust air system with a special internal lip seal

US

Double-walled system

UE

A modular, air-gap-insulated exhaust system with a special internal lip seal

US

Double-walled system

US

A concentric air-exhaust system usable at high exhaust gas temperatures in negative pressure

US

Concentric system

XD

High performance double layered flexible liner for chimney relining.

US

Flexible liners