UE

The Metaloterm® UE system is a modular twin wall flue system, made of stainless steel with an air gap insulation and sealing ring.  Metaloterm® UE is suitable for low temperatures, condensing and non- condensing applications with flue gasses in positive or negative pressure. The system is suited for a wide range of applications such as condensing heaters and boilers, gas-fired stoves and ventilation systems.

UE

A modular twin wall flue system

The Metaloterm® UE system is a modular twin wall flue system, made of stainless steel with an air gap insulation and sealing ring.  Metaloterm® UE is suitable for low temperatures, condensing and non- condensing applications with flue gasses in positive or negative pressure. The system is suited for a wide range of applications such as condensing heaters and boilers, gas-fired stoves and ventilation systems.

Applications

  • Gas fired stoves
  • Oil fired stoves
  • Industrial ventilation systems
  • Air inlet or ventilation system
  • Condensing heaters and boilers
  • Atmospheric gas-fired boilers

Advantages

  • Universal applicable flue-system
  • Compatible with Metaloterm ME en Metaloterm MF
  • Pressure-tight up to 5000 Pa
  • Inner- and outer wall from high quality stainless steel
  • Stress free thermal expansion
  • Extremely low heat mass maintains draught and allows longer runs of installed flue

Technical Data

Features
Type Chimney/flue system
Mode of operation Dry / Wet
Pressure Negative pressure (N)/ positive pressure (P/H)
Operating pressure 5000 Pa
Operating temperature 400 ° C (N)
200 ° C (P / H)
Short-term temperature 400 ° C (N)
200 ° C (P / H)
Fuel Oil/wood/coal/pellets normal (wood)/gas
seal Elastomer (in case flue gas temperatures exceed 200°C, sealants as well as the cap and sopor seals have to be removed before installation)
Inner shell
Material AISI 316L / EN 1.4404
Wall thickness 0.4 mm
Outer shell
Material AISI 304 / EN 1.4301
Wall thickness 0.4 mm
Thermal insulation
Type Air gap
insulation thickness 7.5 mm

Colour

Name Finish Type Code
Black Matt Heat resistant stove paint (1000 °C) Schiedel code 910

Typical Installation

UE

Offset Calculator

With this calculation tool, you can calculate the required distances in two ways:

  1. When the desired horizontal distortion is known and you want to know which degree position is right for the intended situation.
  2. If you want to know what kind of horizontal and vertical warpage occurs when using a specific bend and intermediate length.

The relevant regulations (e.g. DIN 18160 Part 1) must be observed. If necessary, provide a cleaning or inspection opening. Subject to technical changes – dimensions in mm.

CALCULATE WITH DESIRED OFFSET SPAN

Bend angle:
Diameter: mm
Desired offset span:
mm
Size K: mm
Size M: mm
Length between bends: mm
Offset height: mm
CALCULATE WITH LENGTH BETWEEN BENDS

Bend angle:
Diameter: mm
Length between bends:
mm
Size K: mm
Size M: mm
Offset span: mm
Offset height: mm

Downloads

Schiedel UE Brochure

Schiedel UE Brochure

2.13 MB

Metaloterm UE declarations and technical documents

5.37 MB

Contact

Do you have any questions about our UE stainless steel chimney system? Contact us.

Personal Data
Contact and inquiry
Browse...

Maximum 10MB

Please note our data protection regulations, which are the basis for any use of data by Schiedel GmbH & Co KG.
Please wait...

The product range

Under the Metaloterm brand, we offer our customers single-walled, double-walled and concentric exhaust systems. Our single-walled, soot-fire-resistant and high-quality stainless steel systems are ideal for renovations and new buildings.

All products can be quickly assembled using a sleeve system and can be ordered in black, grey or anthracite. Our double-walled systems are also soot fire resistant and reusable. Thanks to an inner and outer jacket made of stainless steel and high-quality thermal insulation, there are no corrosion-causing cold bridges or thermal bridges. Our concentric systems have been tested with many device types in accordance with EN 613. You will also receive boiler connection pieces for each heat generator in black. Here, too, assembly is quick and uncomplicated thanks to our lightweight components.

AD

A modular pre-insulated exhaust system with a sealing sleeve

UE

Double-walled system

ME

A modular, single-walled exhaust / exhaust air system with a special internal lip seal

UE

Single wall system

MF

A modular, pre-insulated exhaust gas / exhaust air system with a special internal lip seal

UE

Double-walled system

UE

A modular, air-gap-insulated exhaust system with a special internal lip seal

UE

Double-walled system

US

A concentric air-exhaust system usable at high exhaust gas temperatures in negative pressure

UE

Concentric system

XD

High performance double layered flexible liner for chimney relining.

UE

Flexible liners