Schiedel ICS

ICS Twin Wall Insulated Chimney System

ICS is a Twin wall insulated chimney system for gas, oil, wood and multi-fuel. Available in 80 – 300mm internal diameter.

ICS
ICS
ICS

ICS is a twin wall insulated chimney system for use on open and closed stoves, open fires, residential and small commercial multi fuel appliances, with continuous operating temperatures up to 450°C and short firing up to 550°C.

ICS Plus
ICS

ICS is converted into ICS Plus by adding a lip seal to each component with a male form on the liner (see ICS Plus diagram below). This creates a twin wall insulated chimney system designed for the new generation of condensing gas and oil appliances, with continuous operating temperatures up to 200°C, short firing up to 250°C, and positive pressure up to 200pa at the appliance outlet.

ICS 5000

For larger commercial and industrial applications of ICS in diameters 300mm to 700mm please refer to our separate sales brochure. For higher pressure applications up to 5000Pa e.g. generators, combustion and process equipment, please see the commercial brochure.

ICS

A multi-functional twin insulated venting system for use on a wide range of heating appliances, stand-by power engines, CHP and service ducting

Features

  • Simple push-fit jointing system, secured by locking band.
  • Advanced corrosion resistant design and construction uses laser welded 316L stainless steel inner liners and 304 stainless steel case. The only stainless steel system to have passed the internationally recognised GASTEC corrosion test.
  • The jointing system increases rigidity and ensures easy draindown of any condensate in the flue.
  • Capillary break prevents moisture being drawn through the joint.
  • Because of the sleeve joint, the insulation in the pipe is able to be continuous along the length of the system ensuring no hot spots.
  • The 25mm high efficiency Superwool™ blanket maintains flue gas temperature, maximising efficiency, improving flue draught on start up and minimising condensation.
  • Low external case temperature.
  • The assembly method allows the inner liner to expand and contract with temperature at the female end. The flue can withstand the temperatures of a soot fire without loosing the integrity of the joints.
  • Generous lead-in edges on liner and case for ease of jointing.

TECHNICAL SPECIFICATION

ICS ICS Plus ICS 5000
Fuel Gas, Oil, wood, coal Gas, oil Deisel generators, gas, oil
Firing temp 450°C 160°C
Continuous Firing temp 540°C
Short Firing temp 550°C 200°C 760°C
Thermal Shock 1000°C 1100°C
Mode of Operation Zero & negative pressure Positive pressure Positive, zero & negative pressure
Pressure Capabilities 40Pa 200Pa 5000Pa (for higher pressure applications consult Rite-Vent Technical Department)
Fire Rating 4 Hours Fire Rating to BS 476 Part 20
Outer Case 304 : 1.4301 : X5CrNi 18-10
Outer Case Thickness 0.6mm 0.6mm (150 – 455mm dia.) 0.7mm (505 – 605mm dia.)
Seam Laser or inert gas welded
Liner 316L : 1.4404 : X2CrNiMo 17-12-2
Liner Thickness (mm) 0.5mm 0.6mm
Insulation High performance mineral fibre
Insulation Thickness 25mm (50, 75, 100 available) 25mm
Average Thermal Resistance (200°C) 0.508m² k/w

Dimensions

The dimension details are:

Int Ø mm 80 100 130 150 180 200 230 250 300
Ext Ø mm 130 150 180 200 230 250 280 300 350

APPLICATIONS

  • Stoves, biomass appliances and open fires
  • Residential & small commercial applications
  • Atmosphere & condensing applications
  • Oil and gas and biomass appliances.

COMPONENTS & SYSTEMS

Typical installations of the ICS range will give you a brief overview of the components of the system.

ICS
ICS
ICS
ICS

Installation Tips

In this section you will find information relating to specific components to show correct use, or supplementing information from the installation instructions. If further information is required, please do not hesitate to contact us directly on +44 (0)191 416 1150.

Bungalow Firestop Kits

ICS Twin Wall Insulated Chimney System Installation

A ventilated fire stop plate is not required for single storey bungalows with a ventilated loft space. Schiedel has developed a solid fire stop kit that can be fitted even more unobtrusively in the ceiling.

The fire stops can be used with Eco ICID and ICS twin wall flues and are available in three options:
one piece round, two piece round and one piece square.

ICS

These unventilated fire stop plates may only be used on a combustible ceiling in a bungalow where there is a minimum 60mm distance to combustibles where the chimney penetrates the ceiling area and where the roof space above the ceiling is open and ventilated. Within the roof space, a protective wire mesh framework must be built around the chimney to ensure the minimum 60mm distance to combustibles is maintained.

ICS
Magnetic Firestop Cover Plate Kit

ICS Twin Wall Insulated Chimney System Installation

This new addition to the ventilated firestop range has been introduced an aesthetic cover plate kit, which fastens to the standard ventilated firestops using the magnets which are provided in the kit along with the cover plates. Kits are available in plain finish, painted matt black to RAL 9005, or painted matt white to RAL 9016 to match the firestops.

ICS

Magnetic firestop cover plate kits for use exclusively in combination with stove starter pipes and ventilated firestop plates.

Load Bearing Roof Support

ICS Twin Wall Insulated Chimney System Installation

The roof support is supplied as a kit complete with two side plates for fixing to the roof trusses, a band to give lateral support to the chimney as it passes through the roof, and 3 self tapping screws, which are secured to the chimney through the band to give a load bearing capacity. When the plates are installed above the roof trusses as in Fig.1 the maximum number of pipes, which may be suspended from the roof support is 6 x 1m pipes.When the plates are attached below the trusses as in Fig.2 the maximum number of pipes, which may be suspended is 4 x 1m pipes.

  1. The band should be lowered down over the top of the Eco ICID pipe, and positioned so that the the side plates are resting on top of the roof trusses as in Fig.1 or below the roof trusses in the case of Fig. 2 .The recommended position is always as per Fig.1 where circumstances allow this solution.
  2. The band should then be tightened using the nut and bolt provided.
  3. Using the holes pre-drilled in the roof support band, drill 3mm holes in the outer case of the chimney section (drill bit should be set for a depth no greater than 10mm to avoid any damage to the liner of the chimney)
  4. Use the self tapping screws provided to secure the clamp band to the outer casing of the chimney section.

Please note: It is the responsibility of the installer to ensure that the joist to which the roof support is being attached is load bearing and capable of withstanding the weight of the system being installed.

ICS

DOWNLOADS

ICS - Product Approvals

ICS - Product Approvals

2.25 MB

ICS 25 - Approvals

ICS 25 - Approvals

3.71 MB

ICS 50 - Approvals

ICS 50 - Approvals

609.58 KB

ICS 5000 - Approvals

ICS 5000 - Approvals

3.54 MB

ICS Twin Wall Insulated Chimney System - Components

ICS Twin Wall Insulated Chimney System - Components

3.90 MB

ICS Installation Instructions

ICS Installation Instructions

5.83 MB

Choosing the right flue for your appliance

Choosing the right flue for your appliance

4.23 MB

Alternative Connection Methods For The ICS Chimney System

Alternative Connection Methods For The ICS Chimney System

564.04 KB

House of Flues

House of Flues

60.06 KB

 

 

Videos

Arrow
Arrow
ICS Internal Roof
ArrowArrow
Slider