Forming the joint<\/strong><\/p>\nThe components are flanged at both ends with a spigot at the male end. The spigot protrudes by 25mm to ensure correct alignment of the joint and seating of the gasket on the engineered flanges.<\/p>\n
A gasket is pre-installed on the male end of the component for ease of installation.<\/p>\n
When two components are butted together the joint is secured using a V Band.<\/p>\n
No sealants are required as the joints come with a pre-installed gasket.[\/vc_column_text][\/vc_column][\/vc_row][vc_row id=”technical-specification”][vc_column][vc_column_text]Expansion Allowance<\/strong><\/p>\nAs the method of assembly for HP 5000 provides a continuous structural inner wall, normal expansion of the duct in its entirety must be allowed for by the use of expansion components.<\/p>\n
Performance<\/strong><\/p>\nWorking pressure:
\nWith Expansion Lengths up to 40Pa
\nWith Expansion Bellows up to 5000Pa<\/p>\n
Maximum Temperature Rating: continuous 600\u00b0C (European Standard Designation T600).<\/p>\n
HP 5000 is available in a range of 18 internal diameters from 130mm to 800mm. The flange to flange installed straight lengths are 307, 470 and 960mm long. The external diameter is dependent on the width of the cavity \u2013 25mm or 50mm. Specialised components can be manufactured to suit application requirements.<\/p>\n
Supports<\/strong><\/p>\nHP 5000 must be supported using only Schiedel Rite-Vent approved components, in conjunction with suitable steel work as necessary. Care is needed to ensure that supports are capable of accommodating expansion.[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][mk_divider style=”thin_solid” margin_top=”0″][\/vc_column][\/vc_row][vc_row id=”applications”][vc_column][vc_column_text disable_pattern=”false”]\n<\/a>Applications<\/h3>\n[\/vc_column_text][vc_column_text]A typical range of applications would include:<\/strong><\/p>\n\n- Diesel generators and turbines<\/li>\n
- Boilers (high or low temperature)<\/li>\n
- Smoke and waste extraction<\/li>\n
- Refuse and laundry chutes<\/li>\n
- Lightweight particle movement<\/li>\n
- Kitchen extraction & Kitchen exhaust air<\/li>\n
- Thermal power stations<\/li>\n
- Petrol powered generators<\/li>\n
- Emergency generators<\/li>\n
- Smoke and waste gas extraction<\/li>\n
- Refuse and laundry chutes<\/li>\n
- Transportation shaft<\/li>\n
- Forging furnaces<\/li>\n<\/ul>\n[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][mk_divider style=”thin_solid” margin_top=”0″][\/vc_column][\/vc_row][vc_row id=”downloads”][vc_column][vc_column_text disable_pattern=”false”]\n<\/a>